Alder wooden keychain with laser image Estonian map 4.3x5cm
3.20 €
Keychain made of alder wood, the image is cut with a laser.
!!! Made by hand, the tone and pattern of the wood may differ from the picture.
Pendant dimensions: 0.5 x 4.3 x 5 cm
Only 73 left in stock
Key holder made of natural alder wood, the image is burned on the wood.
| Weight | 0.006 kg | 
|---|---|
| Dimensions | 7 × 4.3 × 1 cm | 
Related Products
The cutting part is made of stainless steel. The handle is made of ash tree, to which a juniper mosaic is glued for decoration.
Dimensions: approx. 7,2 x 23,5 cm
Cutting unit width of 5 cm
Only 140 left in stock
Salad nipers made of juniper. The surface is sanded with fine sandpaper and natural, free of oil and varnish.
!!! Made by hand, the tone and pattern of juniper may differ from what is shown in the picture.
Dimensions: ca 3 x 3,5 x 18 cm
Only 77 left in stock
Beautiful and strong wooden key hanger with a spatial design. Stained with water-based paints.
Material: plywood
Dimensions : 22 x 22 x 4,5 cm
Only 17 left in stock
Beautiful and strong wooden key hanger with a spatial design. Stained with water-based paints.
Material: spruce board, plywood, cord
Dimensions (without cord): 18.5 x 14.5 x 2.5 cm
Only 18 left in stock
A strong and decent potato masher made of beech wood. A wooden potato masher that crushes lightly boiled potatoes and vegetables. The wood does not scratch the surface of the kitchen utensil. The surface is natural and genuine, ie it has not been treated with oil, varnish or any other chemical.
!!! Made by hand and the tone and pattern of beech may differ from what is shown in the picture.
Dimensions: ca Ø4,7 x 28 cm
Only 20 left in stock
The keychain is made of laser-cut plywood, decorated with genuine amber and covered with thin plastic glass on both sides.
Pendant dimensions: 0.4 x Ø 4.3 cm
Length: about 11.5 cm
TO ADD THE PRODUCT TO THE BASKET CLICK ON THE OPTIONS PICTURE
Beautiful and strong wooden key hanger with a spatial design. Stained with water-based paints.
Material: spruce board, plywood
Dimensions: 22 x 14 x 4,5 cm
Only 1 left in stock
A stylish napkin holder is not only practical but also a visually pleasing detail that enhances your everyday dining or festive table. It is suitable for the kitchen, dining room, café, or picnic table.
Dimensions: 5,5 x 9,5 x 19 cm
TO ADD THE PRODUCT TO THE BASKET CLICK ON THE OPTIONS PICTURE
Rolling pin made of solid beech wood. A wooden rolling pin is not too slippery, which provides better control while rolling. It is also visually appealing and gives a classic, homely feel. The surface is natural and untreated – no oil, lacquer, or other substances have been applied.
!!! Made by hand and the tone and pattern of beech may differ from what is shown in the picture.
Dimensions: ca Ø5,5 x 37 cm
Roll length: 19 cm
Only 9 left in stock
Salad nipers made of juniper. The surface is sanded with fine sandpaper and natural, free of oil and varnish.
!!! Made by hand, the tone and pattern of juniper may differ from what is shown in the picture.
Dimensions: ca 3 x 4,5 x 26 cm
Only 169 left in stock
A keychain made of natural juniper, the picture is burned on wood. The surface is sanded with fine sandpaper and natural, free of oil and varnish.
!!! Made by hand and no exactly the same keychain. The tone and pattern of the wood may differ from the picture.
!!! No stencil has been used to make this product. Dimensions may vary by ±10% and the shape of each keychain is slightly different.
Dimensions: approx. 0,8 x Ø4 cm
The price of one product is shown
Only 30 left in stock
Nutcracker made of strong ash tree. Walnuts are not a problem either. Suitable for complementing a gift package.
Dimensions ca: Ø 6.5 x 10 cm
The price of one product is shown
Only 130 left in stock





 
                         
                         
    
 
    
 
    
 
    
 
    
 
     
    
 
     
    
 
    
 
    
 
    